교수소개

교수소개

로그인 하시면 구성원에게 공개된 정보를 확인하실 수 있습니다.
볼드체 항목 정보는 본인이 개인정보공개설정을 할 경우에만 공개됩니다.
성명 조종두 ( 趙鍾斗 / Cho, Chongdu )
소속 기계공학과
E-Mail cdcho@inha.ac.kr
연구실 전화 032-860-7321
임용일자
직급 교수
연구실명 고체역학연구실
세부전공 재료역학(복합재료), 유한요소법, 전산응력해석, 열응력
학력  1983.02 서울대학교(학사)/기계공학
 1985.02 한국과학기술원(석사)/기계공학
 1991.12 Univ. of Michigan(박사)/복합재료
경력

연구업적

학위논문

주요학술논문

- Failure behavior/characteristics of fabric reinforced polymer matrix composite and aluminum6061 on dynamic tensile loading, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 31권 8호, 3661~3664, 2017.
- 고경도 장갑판재 배열이 고속충격거동에 미치는 영향, 한국정밀공학회지, 34권 6호, 417~424, 2017.
- 타이밍 체인 시스템의 초기 장력이 전달 오차에 미치는 영향, 한국자동차공학회 논문집, 25권 2호, 133~139, 2017.
- A novel approach to impose periodic boundary condition on braided composite RVE model based on RPIM, COMPOSITE STRUCTURES, 163, 77~88, 2017.
- 적층각도를 지닌 CFRP 시험편에서의 크랙전파 특성, 대한기계학회논문집 A, 40권 12호, 1013~1019, 2016.
- An investigation on the fatigue behavior of DCB specimen bonded with aluminum foam at Mode III, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 30권 10호, 4475~4478, 2016.
- Two-dimensional dynamic analysis of sandwich plates with gradient foam cores, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 30권 9호, 4083~4093, 2016.
- A study on fatigue fracture at double and tapered cantilever beam specimens bonded with aluminum foams, COMPOSITES PART B-ENGINEERING, 103, 139~145, 2016.
- 디스크 브레이크 로터 마찰면 가공 형태에 따른 성능 변화 연구, 한국자동차공학회 논문집, 24권 4호, 471~479, 2016.
- An optimised silicon piezoresistive microcantilever sensor for surface stress studies, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 22권 9호, 2279~2285, 2016.
- 지역난방 열배관 강화를 위한 실증시험 연구, 대한기계학회논문집 A, 40권 3호, 245~252, 2016.
- A fast Bayesian approach using adaptive densifying approximation technique accelerated MCMC, INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 24권 2호, 247~264, 2016.
- Effect of p-type and n-type piezoresistors on characteristics of high sensitive silicon piezoresistive microcantilever designs, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 22, 93~101, 2016.
- Analysis of Real-Time Estimation Method Based on Hidden Markov Models for Battery System States of Health, JOURNAL OF POWER ELECTRONICS, 16권 1호, 217~226, 2016.
- Fast Bayesian approach to model calibration of vehicle occupant restraint systems, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 21권 1호, 1~8, 2016.
- Sobol's sensitivity analysis for a fuel cell stack assembly model with the aid of structure-selection techniques, JOURNAL OF POWER SOURCES, 301, 1~10, 2016.
- A new indentation model for sandwich circular panels with gradient metallic foam cores, COMPOSITES PART B-ENGINEERING, 83, 270~275, 2015.
- Shape-Dependent Resistances of Ni Cr and Ta N Thin Films for Sensor Applications, INTERNATIONAL JOURNAL OF FUTURE ENGINEERING, 2015, 1~5, 2015.
- 점용접의 해석 모델 개발 및 용접조건에 대한 영향도 분석, 한국자동차공학회 논문집, 23권 6호, 642~649, 2015.
- Dynamic response of beam-like composite sandwich plates with transversely flexible cores, OCEAN ENGINEERING, 108, 778~788, 2015.
- Study of noncontact torque measurement method with magnetic sensor band, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 9호, 3897~3903, 2015.
- A hybrid parameter identification method based on Bayesian approach and interval analysis for uncertain structures, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 60-61, 853~865, 2015.
- Experimental and analytical verification of the characteristics of shear fatigue failure in the adhesive interface of porous foam materials, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 6호, 2333~2339, 2015.
- A method for epistemic uncertainty quantification and application to uniaxial tension modeling of polymers, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 3호, 1199~1206, 2015.
- Micromechanically motivated constitutive model to characterize the hygrothermomechanical response of polymer electrolyte membrane, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 3호, 1145~1150, 2015.
- Stability of Polymer Electrolyte Membranes in Fuel Cells: Initial Attempts to Bridge Physical And Chemical Degradation Modes, FUEL CELLS, 15권 1호, 196~203, 2015.
- A study of the impact properties of adhesively-bonded aluminum alloy based on impact velocity, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 2호, 493~499, 2015.
- RESPONSE OF AN INDENTED SQUARE TUBE UNDER IMPACT LOADING, STRENGTH OF MATERIALS, 47권 1호, 156~163, 2015.
- Fracture property of double cantilever beam of aluminum foam bonded with spray adhesive, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 1호, 5~10, 2015.
- A Feasibility Study of a Noncontact Torque Sensor with Multiple Hall Sensors, JOURNAL OF SENSORS, 2015, 1~6, 2015.
- Study on crack propagation of adhesively bonded DCB for aluminum foam using energy release rate, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 29권 1호, 45~50, 2015.
- An Investigation of the Mechanical Behaviors of [45/-45/0/90](ns) Satin Weave Composite at Different Loading Rates, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 22권 5호, 367~375, 2015.
- Modeling and Implementation of Fixed Switching Frequency Sliding Mode Control to Two-Stage DC-DC Converter, International Journal of Control, Automation, and Systems, 12권 6호, 1225~1233, 2014.
- An effective inverse procedure for identifying viscoplastic material properties of polymer Nafion, COMPUTATIONAL MATERIALS SCIENCE, 95, 159~165, 2014.
- Thermal Analysis of Both Ventilated and Full Disc Brake Rotors with Frictional Heat Generation, APPLIED AND COMPUTATIONAL MECHANICS, 8, 5~24, 2014.
- Thermal stress analysis method considering geometric effect of risers in sand mold casting process, CHINA FOUNDRY, 11권 6호, 531~536, 2014.
- 자동차 드럼 브레이크의 스퀼 전산 해석 연구, 한국자동차공학회 논문집, 22권 7호, 16~22, 2014.
- Effect of p-type and n-type piezoresistors on characteristics of high sensitive silicon piezoresistive microcantilever designs, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, -, 1~9, 2014.
- Experimental Investigation and Discussion on the Mechanical Endurance Limit of Nafion Membrane Used in Proton Exchange Membrane Fuel Cell, ENERGIES, 7권 10호, 6401~6411, 2014.
- On Accuracy of Sensitivity Relations for Piezoresistive Microcantilevers Used in Surface Stress Studies, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 15권 10호, 2133~2140, 2014.
- Failure mechanisms of concrete slab-soil double-layer structure subjected to underground explosion, SHOCK WAVES, 24권 5호, 545~551, 2014.
- Effect of hygrothermal ageing on the tensile and fracture response of a fuel cell membrane, SMART MATERIALS AND STRUCTURES, 23권 7호, 075017-1~075017-4, 2014.
- Ex-situ temperature and humidity aging effect on the tensile behavior of Nafion N117 membrane used in Ionic Polymer-Metal Composite actuators, MATERIALS LETTERS, 124, 293~295, 2014.
- 접착제로 접합된 이중외팔보 알루미늄폼의 파괴 거동에 관한 연구, 대한기계학회논문집 A, 38권 5호, 521~526, 2014.
- 3방 비례제어 조절밸브 개발 및 성능 연구, 설비공학 논문집, 26권 5호, 218~223, 2014.
- Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles, ADVANCES IN MECHANICAL ENGINEERING, , , 2014.
- Effects of Temperature and Volume Agglomerate Fraction on Mechanical Response of PEMFC Electrodes, APPLIED MECHANICS AND MATERIALS, 548-549, 379~382, 2014.
- Dynamic Compressive Behaviors of multi Directional Woven Composite Laminates at Different Strain Rates, POLYMERS & POLYMER COMPOSITES, 22권 2호, 169~175, 2014.
- 동적 탄성 변형 해석을 통한 고속프레스 정밀도 분석, 대한기계학회논문집 A, 38권 1호, 79~88, 2014.
- 충돌시험을 통한 교통사고 재현 연구, 한국자동차공학회 논문집, 21권 6호, 58~63, 2013.
- Improving sensitivity of piezoresistive microcantilever biosensors using stress concentration region designs, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 46권 50호, , 2013.
- Study on the fatigue experiment of TDCB aluminum foam specimen bonded with adhesive, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 14권 10호, 1791~1795, 2013.
- Experimental Study on the Fatigue Crack Propagation Behavior of DCB Specimen with Aluminum Foam, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 14, 1395~1399, 2013.
- Experimental study of the impact characteristics of sandwich composites with aluminum honeycomb cores, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 14권 3호, 415~421, 2013.
- High S/N Ratio Slotted Step Piezoresistive Microcantilever Designs for Biosensors, SENSORS, 13, 4088~4101, 2013.
- Thermo-Mechanical Response of Fuel Cell Electrodes: Constitutive Model and Application in Studying the Structural Response of Polymer Electrolyte Fuel Cell, FUEL CELLS, 13권 2호, 217~226, 2013.
- EXPERIMENTAL STUDY ON THE IMPACT CHARACTERISTICS OF A SANDWICH COMPOSITE WITH AN ALUMINUM FOAM CORE, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 14, 61~66, 2013.
- 주행 중 디스크 온도 변화와 열간 저더 임계속도와의 관계 예측, 한국자동차공학회 논문집, 21권 1호, 61~67, 2013.
- Mechanical properties and failure modes of polymer matrix composite laminates, SOCIETY OF PLASTICS ENGINEERS, 10.2417권 spepro.004505호, 1~2, 2012.
- Effect of compressive loading speed and stacking sequence on mechanical characteristics of satin weave E-glass/epoxy composites, POLYMER COMPOSITES, 33권 9호, 1603~1612, 2012.
- Robustly nano-tailored honeycomb structure for high-throughput antireflection polymer films, JOURNAL OF MATERIALS CHEMISTRY, 22권 33호, 17037~17043, 2012.
- Stepped piezoresistive microcantilever designs for biosensors, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 45권 21호, 1~8, 2012.
- 유한요소해석을 이용한 증육 모델의 성형특성 연구, 소성가공, 21권 4호, 234~239, 2012.
- A conduction-convection model for self-heating in piezoresistive microcantilever biosensors, SENSORS AND ACTUATORS A-PHYSICAL, 175, 19~27, 2012.
- Impact fracture behavior at the material of aluminum foam, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 539, 250~258, 2012.
- Comparison between Conduction and Convection Effects on Self-Heating in Doped Microcantilevers, SENSORS, 12권 2호, 1758~1770, 2012.
- Crack propagation of CCT foam specimen under low strain rate fatigue, INTERNATIONAL JOURNAL OF FATIGUE, 35권 1호, 23~30, 2012.
- Experimental study on two types of new beam-to-column connections, STEEL AND COMPOSITE STRUCTURES, 11권 4호, 291~305, 2011.
- Stress and Strain Concentrations for the Filleted Shafts in Tension, ADVANCED SCIENCE LETTERS, 4권 8-10호, 2631~2636, 2011.
- On self-heating in piezoresistive microcantilevers with short piezoresistor, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 44권 28호, 285402, 2011.
- Development of micromagnetostrictive wireless controllable actuator, JOURNAL OF APPLIED PHYSICS, 109권 7호, 07E501, 2011.
- 고속철도 디스크 브레이크의 유연 패드 개발에 대한 연구, 한국철도학회논문집, 14권 2호, 100~108, 2011.
- Poroelastic PEM fuel cell catalyst layer and its implication in predicting the effect of mechanical load on flow and transport properties, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 36권 5호, 3623~3634, 2011.
- Study on forming condition and tool of flywheel by using flow forming process, MATERIALS RESEARCH INNOVATIONS, 15, 336~339, 2011.
- Effect of gas-diffusion electrode material heterogeneity on the structural integrity of polymer electrolyte fuel cell, ENERGY, 35권 12호, 5241~5249, 2010.
- 한계상태 설계법을 이용한 지역난방 열배관의 국부좌굴 연구, 대한기계학회논문집 A, 34권 12호, 1829~1836, 2010.
- An Analytical Model of Joule Heating in Piezoresistive Microcantilevers, SENSORS, 10, 9668~9686, 2010.
- An inscribed surface model for the elastic properties of armchair carbon nanotube, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 24권 11호, 2233~2239, 2010.
- 공학 기술 기반 개인 디지털 디자인 프로세스를 적용한 컨셉카 개발, 한국자동차공학회 논문집, 18권 5호, 9~19, 2010.
- Effect of Bipolar Plate Materials on the Stress Distribution and Interfacial Contact Resistance in PEM Fuel Cell, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 11권 4호, 583~588, 2010.
- THE STUDY OF INSCRIBED SURFACE OF ARMCHAIR CARBON NANOTUBES, MODERN PHYSICS LETTERS B, 24권 19호, 2021~2029, 2010.
- Gradation of mechanical properties in gas diffusion electrode. Part 1: Influence of nano-scale heterogeneity in catalyst layer on interfacial strength between catalyst layer and membrane, JOURNAL OF POWER SOURCES, 195권 9호, 2709~2717, 2010.
- Gradation of mechanical properties in gas-diffusion electrode. Part 2: Heterogeneous carbon fiber and damage evolution in cell layers, JOURNAL OF POWER SOURCES, 195권 9호, 2718~2730, 2010.
- A New Extension of Cauchy-Born Rule for Monolayer Crystal Films, NANOSCALE RESEARCH LETTERS, 5권 5호, 863~867, 2010.
- The stress and strain concentrations of out-of-plane bending plate containing a circular hole, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 52권 6호, 836~846, 2010.
- Experimental Study on Impact Resistance Properties of T300/Epoxy Composite Laminates, JOURNAL OF COMPOSITE MATERIALS, 44권 7호, 857~870, 2010.
- 다구찌 방법을 이용한 지역난방시스템의 벤드형상 설계, 대한기계학회논문집 A, 34권 3호, 307~313, 2010.
- Fracture Behaviour of Adhesively-bonded Composite Materials under Impact Loading, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 11권 1호, 89~95, 2010.
- Shaking Table Test of Damping Behavior of SSI Systems, CHINA CIVIL ENGINEERING JOURNAL, 43권 2호, 1~5, 2010.
- Online Parameter Estimation of the Ni-MH Batteries Based on Statistical Methods, ENERGIES, 3, 206~215, 2010.
- 아우디를 위한 차세대 친환경 SUV 컨셉 스타일링, 디자인학연구, 22권 6호, 31~34, 2009.
- 유한요소법을 이용한 LSP 표면처리 공정의 잔류응력 예측, 대한기계학회 논문집A, 33권 8호, 767~772, 2009.
- Electric and magnetic field effects on the magnetostrictive thin film for MEMS, JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, 8, , 2009.
- Deflection, Frequency, and Stress Characteristics of Rectangular, Triangular, and Step Profile Microcantilevers for Biosensors, SENSORS, 9권 8호, 6046~6057, 2009.
- A finite thin circular beam element for out-of-plane vibration analysis of curved beams, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 23, 1396~1405, 2009.
- Comparison between Deflection and Vibration Characteristics of Rectangular and Trapezoidal profile Microcantilevers, SENSORS, 9, 2706~2718, 2009.
- Study of Dynamic Crack Propagation in 3PB Steel Specimens Loaded by Impact, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 10, 67~72, 2009.
- 유한요소 시뮬레이션을 통한 지역난방열배관 특성 평가 및 강화이형관의 제안, 대한기계학회 논문집A, 33권 4호, 337~345, 2009.
- Research on Measurement of Daming Ratios of Full-Scale SSI System and its Distribution Law, CHINESE JOURNAL OF ROCK MECHANICS AND ENGINEERING, 28권 3호, 641~648, 2009.
- A PROCESS MAP FOR SEQUENTIAL COMPRESSION-BACKWARD EXTRUSION OF AZ31 MG ALLOYS AT WARM TEMPERATURS, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 22권 31-32호, 5649~5654, 2008.
- 초박판 성형용 고속 정밀프레스에 대한 해석적 연구, 소성가공, 17권 8호, 643~648, 2008.
- ENERGY OF ARMCHAIR NANOTUBE USING THE MODIFIED CAUCHY-BORN RULE, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 22권 31-32호, 5881~5886, 2008.
- STUDY ON SOFTENING CONSTITUTIVE MODEL OF SOFT ROCK USING STRAIN SPACE BASED UNIFIED STRENGTH THEORY, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 22권 31-32호, 5375~5380, 2008.
- Magnetoelastic Characteristics of the Multilayered Magnetostrictive Thin Film With Polyimide Substrate for Micro Actuator, IEEE TRANSACTIONS ON MAGNETICS, 44, 4049~4052, 2008.
- Numerical Modeling and Characterization of Micromachined Flexible Magnetostrictive Thin Film Actuator, IEEE TRANSACTIONS ON MAGNETICS, 44, 3209~3212, 2008.
- A Study on Increasing Sensitivity of Rectangular Microcantilevers Used in Biosensors, SENSORS, 8권 11호, 7530~7544, 2008.
- A numerical study on bolted end-plate connection using shape memory alloys, MATERIALS AND STRUCTURES, 41권 8호, 1419~1426, 2008.
- Prediction of Hot Spots by Correlating Finite Element Analysis and Measurement for an Automotive Disk Brake, TRIBOLOGY TRANSACTIONS, 51, 609~620, 2008.
- The effect of biaxial load on stress and strain concentrations in a finite thickness elastic plate containing a circular hole, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 75권 1호, 103~126, 2008.
- A study of thermal and mechanical behaviour for the optimal design of automotive disc brakes, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 222권 D6호, 895~915, 2008.
- Abnormal fracture appearance in drop-weight tear test specimens of pipeline steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 483, 239~241, 2008.
- Forming characteristics of AZ31B magnesium alloy in bidirectional extrusion process, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 201권 1-3호, 179~182, 2008.
- Study on advanced multilayered magnetostrictive thin film coating techniques for MEMS application, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 201권 1-3호, 678~682, 2008.
- Effect of compressive residual stress induced during fabricating process in the core of clamped sandwich plate under shock loading, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 22권 9-11호, 1195~1200, 2008.
- Modified boundary layer analysis for a mode III crack problem, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 22권 4호, 653~661, 2008.
- Investigation on the magnetomechanical behavior of trilayered GM actuator, JOURNAL OF RARE EARTHS, 26권 2호, 264~267, 2008.
- Modified boundary layer analysis of an electrode in an electrostrictive material, ARCHIVE OF APPLIED MECHANICS, 78권 3호, 191~209, 2008.
- The concentration of stress and strain in finite thickness elastic plate containing a circular hole, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 45권 3-4호, 713~731, 2008.
- Design and analysis of laminated stainless steel membrane-based microsensors, IEEE SENSORS JOURNAL, 8권 1-2호, 182~187, 2008.
- Feasibility study on a superelastic SMA damper with re-centring capability, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 473권 1-2호, 290~296, 2008.
- Magnetostrictive flexible thin film structure for micro devices, JOURNAL OF RARE EARTHS, 25, 182~185, 2007.
- Magnetostrictive micro mirrors for an optical switch matrix, SENSORS, 7권 10호, 2174~2182, 2007.
- A Study on the Impact Behavior of Adhesively-Bouned Composite Materials, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 21, 1671~1676, 2007.
- The investigation of a shape memory alloy micro-damper for MEMS applications, SENSORS, 7권 9호, 1887~1900, 2007.
- 지능형 포탄의 저 감속 회수장치를 이용한 포탄의 감속방법, 한국소음진동공학회논문집, 17권 9호, 777~784, 2007.
- Feasibility study on a self-centering beam-to-column connection by using the superelastic behavior of SMAs, SMART MATERIALS & STRUCTURES, 16권 5호, 1555~1563, 2007.
- Computational Study on Mechanical Behavior of Steel-concrete Composite by using Interface Elements, KEY ENGINEERING MATERIALS, , 909~912, 2007.
- Mechanical behavior and properties of fiber reinforced ceramic matrix composites for high temperature use, JOURNAL OF AEROSPACE POWER, 22권 4호, 594~601, 2007.
- Intracellular osmotic gradient generation in rat ventricle myocyte by using a micro-perfusion system, JOURNAL OF BIOCHEMICAL AND BIOPHYSICAL METHODS, 70권 3호, 445~453, 2007.
- Damage initiation and propagation in composite shells subjected to impact, COMPOSITE STRUCTURES, 78권 1호, 91~100, 2007.
- 비선형 외팔보의 일대일 공진에서의 위상변화, 한국소음진동공학회논문집, 17권 1호, 48~54, 2007.
- A management on mesh modeling for finite element analysis in casting simulation, JOURNAL OF ACHIEVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING, 20권 1-2호, 335~338, 2007.
- A Finite Element Mesh Management in Casting Simulation, INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND SURFACE ENGINEERING, 1권 1호, 4~17, 2007.
- Effect of SmFe and TbFe film thickness on magnetostriction for MEMS devices, JOURNAL OF MATERIALS SCIENCE, 42권 1호, 384~388, 2007.
- 디스크 브레이크에서 접촉 마찰 진동이 열섬에 미치는 영향 연구, 한국자동차공학회논문집, 15권 1호, 154~161, 2007.
- 온간 후방 압출공정에서 AZ31 Mg 합금의 성형 특성, 한국소성가공학회지-소성가공, 15권 8호, 597~602, 2006.
- Design Study of a Small Scale Soft Recovery System, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol. 20, No. 11, 1961~1971, 2006.
- 스테인리스 강 박막 및 기판을 이용한 배열형 정전용량 압력센서의 전기 기계적 특성연구, 대한기계학회논문집A, 30권 11호, 1369~1375, 2006.
- Asymptotic analysis of an impermeable crack in an electrostrictive material subjected to electric loading, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 43, 6869~6886, 2006.
- Critical speed analysis of juddering due to change in surface temperature of disk brake, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 7, 697~702, 2006.
- Spectral FEM-based Dynamic Characterization of Structural Joints : Theory and Experiment, KEY ENGINEERING MATERIALS, Vols. 326-328, 1629~1632, 2006.
- Nonplanar Nonlinear Vibration Phenomenon on the One to one Internal Resonance of the Circular Cantilever Beam, KEY ENGINEERING MATERIALS, Vols. 326-328, 1641~1644, 2006.
- Effect of Film Thicknesses of TbFe and SmFe on Magnetostrictions for Micro-wireless Actuators, KEY ENGINEERING MATERIALS, Vols. 326-328, 285~288, 2006.
- A Study of Judder Vibration in Automotive Disk Brakes, KEY ENGINEERING MATERIALS, Vols. 326-328, 1301~1304, 2006.
- Experiment study and Finite Element Analysis of Spring Constant of Welded Metal Bellows, KEY ENGINEERING MATERIALS, Vols. 326-328, 537~540, 2006.
- A Study on the Lower Flange's Fracture of Endplate Bolted Connection, KEY ENGINEERING MATERIALS, Vols. 326-328, 983~986, 2006.
- FDM/FEM Hybrid Method with a systematic Field Data Conversion Procedure for Thermal Stress Analysis in Casting Process, KEY ENGINEERING MATERIALS, Vols. 326-328, 1205~1208, 2006.
- Path stability of a crack with an eigenstrain, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 20, 1428~1435, 2006.
- 디스크 브레이크에서 열섬 현상이 발생되는 원인과 저더진동에 미치는 영향, 한국소음진동공학회논문집, 16권 8호, 886~892, 2006.
- Thermo-viscoelastic-plastic deformation of huge products in thermal process, JOURNAL OF ACHIEVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING, Vol. 17, No.1-2, 233~236, 2006.
- A proposed phenomenological model for shape memory alloys, SMART MATERIALS & STRUCTURES, 15, 393~400, 2006.
- Experiment Analysis of Impact Damage of Laminated Composite Shells, ACTA AERONAUTICA ET ASTRONAUTICA SINICA, Vol.27, No.2, 250~252, 2006.
- Study on torque analysis of micro-electromagnetic clutch by using the Finite Element Method, KEY ENGINEERING MATERIALS, 306-308, 613~618, 2006.
- A Finite Element Analysis for Magnetostrictive Thin Film Structures and its Experimental Verification, KEY ENGINEERING MATERIALS, Vols.306-308, 1151~1156, 2006.
- Dynamics of a vibrating micro three-axis ring gyroscope, KEY ENGINEERING MATERIALS, 306-308, 1241~1246, 2006.
- Analysis of electro-statically driven micro-electro-mechanical systems, KEY ENGINEERING MATERIALS, 306-308, 1247~1252, 2006.
- 원형 외팔보의 일대일 공진에서의 비평면 비선형 진동현상, 대한기계학회논문집A, 30권 2호, 171~178, 2006.
- Numerical analysis procedure for predicting temperature field in design of automotive friction clutch, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 7, 61~68, 2006.
- A crack with an electric displacement saturation zone in an electrostrictive material, ARCHIVE OF APPLIED MECHANICS, 76, 19~31, 2006.
- A Finite Thin Circular Beam Element for In-Plane Vibration Analysis of Curved Beams, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, Vol.19, No.12, 2187~2196, 2005.
- Simulation and Experimental Investigation of Impact Damage in Composite Shell, KEY ENGINEERING MATERIALS, Vol.297-300, 1339~1343, 2005.
- Combined fatigue life test and extrapolation of turbine disk mortise at elevated temperature , JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 127/4, 863~868, 2005.
- 정사각형 외팔보에서의 일대일 공진, 한국소음진동공학회논문집, 제15권 제7호, 851~858, 2005.
- 발전소 주 제어실 제어패널의 내진해석, 한국소음진동공학회논문집, 제15권 제6호, 652~659, 2005.
- 원형 외팔보의 응답에서의 비선형 현상, 한국소음진동공학회논문집, 15권 4호, 445~452, 2005.
- FEM을 이용한 Micro-Electromagnetic Clutch 토크와 응답시간해석, 한국전산구조공학회 논문집, 18권 1호, 21~28, 2005.
- FEM을 이용한 Micro-Electromagnetic Clutch 토크해석, 전기학회논문지ABCD, Vol.54B, No.2, 60~65, 2005.
- Micro-frictional dissipation in fiber-reinforced ceramic matrix composites and interfacial shear estimation with a consideration of uneven fiber packing, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol.162-163, 9~14, 2005.
- 얇은 직사각형 외팔보의 비선형 진동현상, 한국소음진동공학회논문집, 14권, 12호, 1314~1321, 2004.
- Computational mechanics of laser cladding process, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 153-154, 494~500, 2004.
- 레이저 클래딩 공정의 3차원 유한요소 모델링, 한국표면공학회지, Vol.37, No.5, 279~288, 2004.
- Progressive Damage Analysis of Composite Shell under Impact Loading, KEY ENGINEERING MATERIALS, vols.274-276, 111~116, 2004.
- On Impact Damage of Composite Shells by a Low-velocity Projectile, JOURNAL OF COMPOSITE MATERIALS, vol.38, no.14, 1231~1254, 2004.
- Computer Simulation on Mechanical Evaluation of Ceramic Matrix Composite Automobile Brake Disks, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 112[5], S423~S427, 2004.
- Effects of Latent Heat on Temperature Field in Laser Cladding Process, JOURNAL OF XIAN JIAOTONG UNIVERSITY, 38권, 5호, 500~503, 2004.
- Effects of Elastic Energy of Thin Films on Bending of a Cantilevered Magnetostrictive Film-Substrate System, KSME INTERNATIONAL JOURNAL, Vol.18, No.4, 611~618, 2004.
- Finite element modeling of magnetostriction for multilayered MEMS devices, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 270, 167~173, 2004.
- Application of 3-D finite element method using Lagragian formulation to dilution control in laser cladding process, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 45, 777~796, 2003.
- Numerical analysis procedures for reliable design of automotive mechanical clutches, JOURNAL OF PASSENGER CARS/ SAE TRANSACTIONS, 2002-01-0762, 1106~1123, 2003.
- A hybrid method for casting process simulation by combining FDM and FEM with an efficient data conversion algorithm, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 133, 2, 2003.
- Study of Postbuckling Analysis of Laminated Composite Shell Based on an Improved Arc-Length Method, ENGINEERING MECHANICS, 20, 1, 106~111, 2003.
- 유한요소법을 이용한 마찰클러치의 열적 거동에 관한 연구, JOURNAL OF CAE, 11-02-C1-1-4, 1~19, 2002.
- Variable influence on behavior of laminated composites subject to impact, JOURNAL OF XI'AN UNIVERSITY OF ARCHITECTURE AND TECHNOLOGY, Vol.33, No.4, 369~374, 2001.
- Transient Thermoelastic Analysis of Disk Brake Using The Fast Fourier Transform and Finite Element Method, JOURNAL OF THERMAL STRESSES, vol.25, No.1(인쇄중), 1~29, 2001.
- 잠열을 고려한 레이저 클래딩 공정의 수치해석, 한국정밀공학회지, 18권, 10호, 134~147, 2001.
- FDM과 FEM의 해석 데이터 변환에 의한 탄소성 열응력 해석, 열처리공학회지, 14권,4호, 228~234, 2001.
- Effects of Some Geometric and Material Factors on Mechanical Response of Laminated Composites due to Low Velocity Impact, JOURNAL OF COMPOSITE MATERIALS, 인쇄중, , 2001.
- Thermo-Elastic Analysis for Chattering Phenomenon of Automotive Disk Brake, KSME INTERNATIONAL JOURNAL, Vol. 15, No. 5, 579~589, 2001.
- Wide Band Laser Heat Treatment using Pyramid Polygon Mirror, OPTICS AND LASERS IN ENGINEERING, 35, 285~297, 2001.
- 횡방향 하중을 받는 금속모재 복합재료의 파손구조, 국내공인학술지(이전), 24권,6호, 1456~1469, 2000.
- FFT-FEM을 이용한 윤활기구에서 표면온도에 관한 연구, 국내공인학술지(이전), Vol.16, No.3, 218~222, 2000.
- Nonlinear Finite Element Analysis of Composite Shell under Impact, 국제수준학술지(이전), Vol.14, No.6, 666~674, 2000.
- 횡방향 압력을 받는 복합적층 원통실린더의 좌굴후 거동 및 손상해석, 국내공인학술지(이전), 17권,4호, 163~172, 2000.
- 응력과 변형률의 Dyad와 행렬에 의한 표현, 국내공인학술지(이전), 24권, 2호, 489~495, 2000.
- Relationship Between Frictional Heating and Micro-Failure State in a Continuous Fibre Reinforced ceramic Matrix Composite under Cyclic Loading, 국제공인학술지(이전), vol.18, 463~466, 1999.
- Dynamic Response and Damage of Composite Shell Under Impact, 국제공인학술지(이전), Vol.13, No.9, 596~608, 1999.
- 경계요소법을 이용한 계면균열의 응력특이성에 관한 고찰, 국내공인학술지(이전), 16권, 4호, 197~204, 1999.
- Stress Distribution of Laminated Composite Shell Subjected to Impact, 기타외국학술지, Vol.31, No.1, , 1999.
- 유한요소법을 이용한 반도체의 산화막 성장에 대한 연구, 대학논문, 27권, 59~65, 1999.
- 전위이론에 의한 열충격하의 균열거동에 대한 연구, 국내공인학술지(이전), 20권,11호, 3408~3414, 1996.
- Ultimate Strength Prediction of Continuous Fiber-Reinforced Brittle Matrix Composites, 국제수준학술지(이전), Vol.10, No.1, 49~56, 1996.
- 횡방향 압력을 받는 복합적층 원통실린더의 좌굴후 거동해석, 대학논문, Vol.24, 23~29, 1996.
- 레이저 표면경화에서 경화깊이 예측, 국내공인학술지(이전), 12권,6호, 87~95, 1995.
- 응력확대계수와 J-적분 결정을 위한 코스틱스방법의 실험조건에 관한 연구, 국내공인학술지(이전), 18권,9호, 2331~2338, 1994.
- 장섬유로 보강된 세라믹 복합재료에서 섬유파단이 마찰일에 미치는 영향, 국내공인학술지(이전), 18권,7호, 1730~1737, 1994.
- Experimental Observation of Frictional Heating in Fiber Reinforced Ceramics , 국제공인학술지(이전), Vol.75,No.4, 929~938, 1992.
- Frictional Heating in a Unidirectional Fiber-Reinforced Ceramic Composite, 국제공인학술지(이전), Vol.11, 41~44, 1992.
- Distribution of Matrix Cracks in a Uniaxial Ceramic Composite, 국제공인학술지(이전), Vol.75,No.2, 316~324, 1992.
- Estimation of Interfacial shear in Ceramic Composites from Frictional Heating Measurements, 국제공인학술지(이전), Vol.74,No.11, 2802~2808, 1991.
- 소성역을 고려한 계면균열의 새로운 모델, 국내공인학술지(이전), 13권,3호, 16~29, 1985.

주요학술저서

- 고체역학의 기초, 케이티링크, 2004.
- FORTRAN의 이해와 공학응용, 복두출판사, 2000.
- Fortran and Application in Mechanical Engineering, 복두출판사, 1999.

특허

- 유량 및 압력 감지 기판, 2015.
- 높은 내구성을 가지는 스텐트, 2015.
- 스텐트 (축방향연신율과 굽힘이 우수하고 방사압축탄성이 뛰어난 스텐트), 2015.
- 자석센서밴드를 이용한 비접촉식 토크 측정창치, 2014.
- 세대용 급탕 열교환 설비를 구비하는 공동주택용 난방 급탕 통합 시스템, 2014.
- 난방과 급탕 사용량에 따라 비례 제어가 가능한 지역난방용 3방향 난방급탕 차압 조절밸브, 2014.
- 회전축의 토크 측정장치, 2014.
- 스텐트의 인장, 굽힘, 방사압축 테스트용 측정장치(Stent test equipment for elongation, bending and radial compression of a stent), 2014.
- 전단제어링을 구비하는 지역난방 열배관용 이형관(SHAPE TUBE FOR DISTRICT HEATING HEAT PIPE HAVING SHEAR CONTROL RING), 2013.
- 높은 내구성을 가지는 스텐트, 2013.
- 스텐트, 2013.
- 교량의 동적응답 측정을 위한 이동식 측정시스템(Movable measuring system for measuring dynamic responses of the bridges), 2013.
- 에너지 하베스팅에 의한 마이크로 자기 왜곡 운동체(MICRO MAGNETOSTRICTIVE ACTUATOR BY ENERGY HARVESTING), 2013.
- 하이드로 클레이와 보온재가 충진된 지역난방 열배관용 이형관(SHAPE TUBE FOR DISTRICT HEATING HEAT PIPE HAVING HYDRO CLAY AND THERMAL INSULATOR), 2013.
- 난방과 급탕 사용량에 따라 비례 제어가 가능한 지역난방용 3방향 난방급탕 차압 조절 밸브, 2013.
- 세대용 급탕 열교환 설비를 구비하는 공동주택용 난방 급탕 통합 시스템, 2013.
- 스텐트 인장, 굽힘, 방사압축 테스트 측정장치, 2013.
- 자기변형 현상을 이용한 초소형 이동체, 2012.
- 교량의 동적응답 측정을 위한 이동식 측정 방법 및 이동식 측정시스템, 2012.
- 에너지 하베스팅에 의한 마이크로 자기 왜곡 운동체, 2011.
- 자기변형 현상을 이용한 마이크로 가오리 운동체, 2011.
- 교량의 동적응답 측정을 위한 이동식 계측시스템, 2009.
- 교량의 동적응답측정을 위한 일체형 이동계측시스템, 2009.
- 양자 교환 박막 연료 전지를 위한 저가의 혼합 양극 판, 2008.
- 자동차용 접이식 좌석 (Foldaway Seat for Automobile), 2008.
- 초탄성 형상기억합금을 이용한 댐퍼 (A damper using super elastic shape memory alloy), 2008.
- 차량용 어시스트 그립 핸들(Assist grip handle for a car), 2007.
- 벨로우즈 고정장치(Bellows Jig), 2007.
- 골프 연습용 받침대(Golf Training Board), 2006.
- 이동통신단말기의 배터리 팩 보호장치(BATTERY PACK PROTECTIVE DEVICE OF MOBILE PHONE), 2006.
- 초탄성 형상기억합금을 이용한 댐퍼, 2006.
- 자동차용 접이식 좌석, 2006.
- 농축액을 이용한 커피자동판매기 (COFFEE VENDING MACHINE USING COFFEE CONCENTRATE), 2006.
- 회전축의 토크 및 회전속도 측정 장치, 2006.
- 자기변형 현상을 이용한 초소형 이동체, 2005.
- 자기변형 현상을 이용한 초소형 이동체, 2005.
- 자기변형 박막을 이용한 초소형 이동체, 2005.
- 이동통신단말기의 베터리 팩 보호장치, 2005.
- 차량용 어시스트 그립핸들, 2005.
- NC선반에서 발생하는 채터진동 감지장치 및 방법, 2005.
- 벨로우즈 고정장치, 2005.
- 골프 연습용 받침대, 2005.
- NC 선반에서 발생하는 채터진동 감지장치 및 방법, 2004.
- 차량용 브레이크 디스크 구조, 2004.
- 농축액을 이용한 커피자동판매기, 2004.
- 전화번호안내 자동기억 및 발신장치, 1998.
- 컴퓨터 문서 작성용 보조판, 1998.