교수소개

교수소개

로그인 하시면 구성원에게 공개된 정보를 확인하실 수 있습니다.
볼드체 항목 정보는 본인이 개인정보공개설정을 할 경우에만 공개됩니다.
성명 김광용 ( 金光龍 / Kwang-Yong Kim )
소속 기계공학과
E-Mail kykim@inha.ac.kr
연구실 전화 032-860-7317
임용일자 1981.03.01
직급 교수
연구실명 전산유체공학연구실
세부전공 전산유체역학과 최적설계, 유체기계 (홴, 펌프, 압축기, 터빈 등), 미세유체역학, 열전달 촉진기술
학력  1978.02 서울대학교(학사)/원자핵공학
 1981.02 한국과학기술원(석사)/기계공학
 1987.02 한국과학기술원(박사)/유체역학
경력  1988.08~1989.07 Imperial College, London University/Visiting Academic
 1997.08~1998.08 Stanford 대학/ NASA/Visiting Scholar
 2005.03~2006.02 University of Florida/Visiting Scolar
 2006.09~2009.08 대한기계학회/논문집 편집장
 2008.01~. International Journal of Fluid Machinery and Systems/편집장
 2008.05~. 미국기계학회(ASME)/펠로우
 2009.09~. 미국항공우주학회(AIAA)/부펠로우
 2010.01~2011.12 한국유체기계학회/회장
 2010.03~. 인하대학교/펠로우 교수
 2012.01~. 아시아유체기계평의회/회장

연구업적

학위논문

주요학술논문

- Parametric Study of an Electroosmotic Micromixer with Heterogeneous Charged Surface Patches, MICROMACHINES, 8권 7호, 199-1~199-16, 2017.
- Shape optimization of a three-dimensional serpentine split-and-recombine micromixer, CHEMICAL ENGINEERING COMMUNICATIONS, 204권 5호, 548~556, 2017.
- Optimization of Bobsleigh Bumper Shape to Reduce Aerodynamic Drag, JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 164, 108~118, 2017.
- Effects of geometric configuration of the channel and electrodes on the performance of a membraneless micro-fuel cell, ENERGY CONVERSION AND MANAGEMENT, 136, 372~381, 2017.
- 핵융합로 디버터 다중충돌제트 냉각시스템의 형상변화가열수력학적 특성에 미치는 영향, 한국전산유체공학회지, 22권 1호, 26~36, 2017.
- Performance analysis of double-layer microchannel heat sinks under non-uniform heating conditions with random hotspots, MICROMACHINES, 8권 2호, 54-1~54-20, 2017.
- 유체-구조 연성해석을 이용한 능동/수동 유동제어방식이 결합된 축류 팬의 성능특성연구, 한국수소및신에너지학회논문집, 28권 1호, 113~119, 2017.
- 정익 슈라우드 공기분사가 단단 천음속 축류압축기의 공력성능에 미치는 영향, 대한기계학회논문집 B, 41권 1호, 9~19, 2017.
- Thermal-hydraulic performance of a multiple jet cooling module with a concave dimple array in a helium-cooled divertor, FUSION ENGINEERING AND DESIGN, 114, 102~112, 2017.
- Combined Effects of Viscous Dissipation and MHD on Free Convection Flow Past a Semi-Infinite Vertical Plate with Variable Surface Temperature in the Presence of Heat Source, JOURNAL OF ENGINEERING THERMOPHYSICS, 26권 1호, 113~124, 2017.
- Comparative study of solar air heater performance with various shapes and configurations of obstacles, HEAT AND MASS TRANSFER, 52권 12호, 2795~2811, 2016.
- Parametric investigation on mixing in a micromixer with two-layer crossing channels, SPRINGERPLUS, 5, , 2016.
- 운전안정성 향상을 위한 원심압축기의 유입부 형상변화에 관한 연구, 한국유체기계학회 논문집, 19권 5호, 12~19, 2016.
- 유입부 형상이 저전압 전동기 냉각홴의 공력성능에 미치는 영향, 한국유체기계학회 논문집, 19권 5호, 42~49, 2016.
- Surrogate-based optimization of a cratered cylindrical hole to enhance film-cooling effectiveness, JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 11권 2호, , 2016.
- Performance Analysis of a Microchannel Heat Sink with Various Rib Configurations, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 30권 4호, 782~790, 2016.
- Optimization of a single-channel pump impeller for wastewater treatment, International Journal of Fluid Machinery and Systems, 9권 4호, 370~381, 2016.
- Evaluation of Various Channel Shapes of a Microchannel Heat Sink, International Journal of Air-Conditioning and Refrigeration, 24권 3호, 1~9, 2016.
- 유체진동기의 형상 변화가 성능에 미치는 영향, 한국전산유체공학회지, 21권 3호, 77~88, 2016.
- Three-objective optimization of a centrifugal pump with double volute to minimize radial thrust at off-design conditions, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 230권 6호, 598~615, 2016.
- Double-Layer Microchannel Heat Sinks With Transverse-Flow Configurations, JOURNAL OF ELECTRONIC PACKAGING, 138권 3호, , 2016.
- High-efficiency design optimization of a centrifugal pump, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 30권 9호, 3917~3927, 2016.
- Efficient multi-objective optimization of a boot-shaped rib in a cooling channel, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 106, 122~133, 2016.
- 능동형 케이싱 트리트먼트의 형상 변화가 원심압축기의공력성능에 미치는 영향, 한국유체기계학회 논문집, 19권 4호, 5~12, 2016.
- Exergetic analysis for optimization of a rotating equilateral triangular cooling channel with staggered square ribs, International Journal of Fluid Machinery and Systems, 9권 3호, 229~236, 2016.
- Microcooling system with impinging jets and a stalactite structure, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 69권 12호, 1376~1389, 2016.
- Free convection effects on a vertical cone with variable viscosity and thermal conductivity, JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS, 57권 3호, 473~482, 2016.
- Multi-Objective Optimization of an Inverse Trapezoidal-Shaped Microchannel, HEAT TRANSFER ENGINEERING, 37권 6호, 571~580, 2016.
- Evaluation of cooling performance of impinging jet array over various dimpled surfaces, HEAT AND MASS TRANSFER, 52권 4호, 845~854, 2016.
- Multi-objective optimization of a double-layered microchannel heat sink with temperature-dependent fluid properties, APPLIED THERMAL ENGINEERING, 99, 262~272, 2016.
- Optimization of a regenerative blower to enhance aerodynamic and aeroacoustic performance, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 30권 3호, 1197~1208, 2016.
- Performance analysis of a multiple micro-jet impingements cooling model, Journal of Engineering Research, 13권 1호, 58~71, 2016.
- 원심펌프의 성능에 대한 더블볼류트의 영향, 한국유체기계학회 논문집, 19권 1호, 37~44, 2016.
- High-efficiency design of a mixed-flow pump using a surrogate model, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 30권 2호, 541~547, 2016.
- Aerodynamic and aeroacoustic optimization for design of a forward-curved blades centrifugal fan, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 230권 2호, 154~174, 2016.
- Optimization of a staggered jet-convex dimple array cooling system, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 99, 161~169, 2016.
- Optimization of pulsatile flow and geometry of a convergent-divergent micromixer, CHEMICAL ENGINEERING JOURNAL, 281, 134~143, 2015.
- Aerodynamic performance of transonic axial compressor with a casing groove combined with blade tip injection and ejection, AEROSPACE SCIENCE AND TECHNOLOGY, 46, 176~187, 2015.
- Multiobjective Optimization of a Micromixer with Convergent-Divergent Sinusoidal Walls, CHEMICAL ENGINEERING COMMUNICATIONS, 202, 1324~1334, 2015.
- 봅슬레이의 형상변화가 공력성능에 미치는 영향, 대한기계학회논문집 C, 3권 3호, 233~240, 2015.
- Mixing analysis in a three-dimensional serpentine split-and-recombine micromixer, CHEMICAL ENGINEERING RESEARCH & DESIGN, 100, 95~103, 2015.
- Multi-objective optimization of arc-shaped ribs in the channels of a printed circuit heat exchanger, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 94, 1~8, 2015.
- Mixing Performance of a Serpentine Micromixer with Non-Aligned Inputs, MICROMACHINES, 6권 7호, 842~854, 2015.
- 신발형 리브의 형상변화가 열전달 및 압력 강하에 미치는 영향, 한국유체기계학회 논문집, 18권 3호, 66~73, 2015.
- 봅슬레이 범퍼 형상에 대한 공력학적 연구, 한국전산유체공학회지, 20권 2호, 37~45, 2015.
- Optimization of Printed Circuit Heat Exchanger Using Exergy Analysis, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 137, , 2015.
- Convergent-divergent micromixer coupled with pulsatile flow, SENSORS AND ACTUATORS B-CHEMICAL, 211, 198~205, 2015.
- Design Optimization of a Centrifugal Fan with Splitter Blades, INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, 32, 143~154, 2015.
- Performance Evaluation of Various Rim-Seal Geometries, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 29, 263~273, 2015.
- Multi-objective optimization of solar air heater with obstacles on absorber plate, SOLAR ENERGY, 114, 364~377, 2015.
- Multi-Objective Optimization of a Passive Micromixer Based on Periodic Variation of Velocity Profile, CHEMICAL ENGINEERING COMMUNICATIONS, 202권 3호, 322~331, 2015.
- Performance Evaluation of Three Types of Passive Micromixer with Convergent-Divergent Sinusoidal Walls, JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN, 22권 6호, 680~686, 2014.
- Mixing Analysis of Passive Micromixer with Unbalanced Three-Split Rhombic Sub-Channels, MICROMACHINES, 5권 4호, 913~928, 2014.
- Effect of a rib on rim seal performance, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 59, 130~135, 2014.
- Shape optimization of inlet part of a printed circuit heat exchanger using surrogate modeling, APPLIED THERMAL ENGINEERING, 72, 90~96, 2014.
- Flow and mixing analysis of non-Newtonian fluids in straight and serpentine microchannels, CHEMICAL ENGINEERING SCIENCE, 116, 263~274, 2014.
- Optimization of the Aerodynamic and Aeroacoustic Performance of an Axial-Flow Fan, AIAA JOURNAL, 52권 9호, 2032~2044, 2014.
- A Parametric Study of the Thermal-Hydraulic Performance of a Zigzag Printed Circuit Heat Exchanger, HEAT TRANSFER ENGINEERING, 35권 13호, 1192~1200, 2014.
- 다양한 부채꼴 핀휜 형상의 열성능 평가, 대한기계학회논문집 B, 38권 7호, 557~570, 2014.
- Performance Evaluation of Various Liquid-Jet Cooling Systems, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 65권 10호, 987~1006, 2014.
- Analysis and optimization of fan-shaped pin-fin in a rectangular cooling channel, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 72, 148~162, 2014.
- Evaluation of heat transfer performances of various rib shapes, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 71, 275~284, 2014.
- Shape optimization of staggered ribs in a rotating equilateral triangular cooling channel, HEAT AND MASS TRANSFER, 50, 533~544, 2014.
- Thermal Performance of a Double-Faced Printed Circuit Heat Exchanger with Thin Plates, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 28, 251~257, 2014.
- 반와류 홀의 형상 변화가 막냉각 효율에 미치는 영향, 한국유체기계학회 논문집, 17권 2호, 12~23, 2014.
- Optimization of a Hybrid Double-Side Jet Impingement Cooling System for High-Power Light Emitting Diodes, JOURNAL OF ELECTRONIC PACKAGING, 136, , 2014.
- Mixing performance of a planar micromixer with circular obstructions in a curved microchannel, CHEMICAL ENGINEERING RESEARCH & DESIGN, 92, 423~434, 2014.
- Three-objective optimization of a staggered herringbone micromixer, SENSORS AND ACTUATORS B-CHEMICAL, 192, 350~360, 2014.
- 재생형 송풍기의 고효율 저소음 설계를 위한 통합형 최적설계 프로그램 개발, 한국유체기계학회 논문집, 17권 1호, 35~40, 2014.
- Free convection on an inclined plate with variable viscosity and thermal diffusivity, THERMOPHYSICS AND AEROMECHANICS, 21, 65~85, 2014.
- FILM COOLING PERFORMANCE OF CYLINDRICAL HOLES EMBEDDED IN A TRANSVERSE TRENCH, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 65권 2호, 127~143, 2014.
- Performance Characterization of Laminar Flow in Multiple Microjet Impingement Heat Sinks, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 28, 133~141, 2014.
- Aerodynamic optimization of a transonic axial compressor with a casing groove combined with tip injection, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 227, 869~884, 2013.
- Aerodynamic Performance of an Axial Compressor with a Casing Groove Combined with Injection, TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 37권 3호, 283~292, 2013.
- Optimization of ejection angles of double-jet film-cooling holes using RBNN model, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 73, 69~78, 2013.
- Performance analysis and design optimization of micro-jet impingement heat sink, HEAT AND MASS TRANSFER, 49, 1613~1624, 2013.
- Multi-objective optimization of a double-faced type printed circuit heat exchanger, APPLIED THERMAL ENGINEERING, 60권 1-2호, 44~50, 2013.
- COMPUTATIONAL ANALYSIS OF TRAILING EDGE INTERNAL COOLING OF A GAS TURBINE BLADE WITH PIN-FIN ARRAYS, JOURNAL OF ENHANCED HEAT TRANSFER, 20권 2호, 137~151, 2013.
- Numerical and experimental investigation on labyrinth seal mechanism for bypass flow reduction in prismatic VHTR core, NUCLEAR ENGINEERING AND DESIGN, 262, 525~534, 2013.
- Parametric study on hydraulic performance of an inlet plenum in a printed-circuit heat exchanger, SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 56권 9호, 2137~2142, 2013.
- Aerodynamic analysis and optimization of a transonic axial compressor with casing grooves to improve operating stability, AEROSPACE SCIENCE AND TECHNOLOGY, 29권 1호, 81~91, 2013.
- Comparative study on performance of a zigzag printed circuit heat exchanger with various channel shapes and configurations, HEAT AND MASS TRANSFER, 49, 1021~1028, 2013.
- 반원형 리브 혹은 그루브가 부착된 림실에 대한 연구, 유체기계저널, 16권 3호, 39~47, 2013.
- Parametric study on a forward-curved blades centrifugal fan with an impeller separated by an annular plate, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 27권 6호, 1589~1595, 2013.
- Design Optimization of Manifold Microchannel Heat Sink Through Evolutionary Algorithm Coupled With Surrogate Model, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 3권 4호, 617~624, 2013.
- Thermal Performance Analysis and Optimization of Microjet Cooling of High-Power Light-Emitting Diodes, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 27권 2호, 235~245, 2013.
- Analysis and Optimization of Double-Jet Film-Cooling Holes, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 27권 2호, 246~254, 2013.
- 인쇄형 열교환기 입구부의 최적설계, 유체기계저널, 16권 2호, 35~41, 2013.
- Multi-Objective Optimization of a Rotating Cooling Channel with Airfoil-Shaped Guide Vanes, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 27, 52~60, 2013.
- Multi-Objective Optimization of a Row of Film Cooling Holes Using an Evolutionary Algorithm and Surrogate Modeling, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 63권 8호, 623~641, 2013.
- Mixing Performance of Passive Micromixer with Sinusoidal Channel Walls, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 46권 3호, 230~238, 2013.
- SHAPE OPTIMIZATION OF AN OUTLET PLENUM OF A PEBBLE BED MODULAR REACTOR, NUCLEAR TECHNOLOGY, 181, 274~281, 2013.
- Mixing performance of a planar micromixer with circular chambers and crossing constriction channels, SENSORS AND ACTUATORS B-CHEMICAL, 176, 639~652, 2013.
- Multi-objective optimization of a guide vane in the turning region of a rotating U-duct to enhance heat transfer performance, HEAT AND MASS TRANSFER, 48권 11호, 1941~1954, 2012.
- A comparative analysis of various shaped film-cooling holes, HEAT AND MASS TRANSFER, 48권 11호, 1929~1939, 2012.
- Numerical Investigation on Aerodynamic Performance of a Centrifugal fan with Splitter Blades, INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 5권 4호, 168~173, 2012.
- 공력음향학을 이용한 축류홴의 삼차원 소음 해석, 유체기계저널, 15권 5호, 48~53, 2012.
- Performance evaluation of a novel film-cooling hole, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 134권 10호, 101702-1~101702-7, 2012.
- Effect of Intake Vortex Occurrence on the Performance of an Axial Hydraulic Turbine in Sihwa-Lake Tidal Power Plant, Korea, INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 5권 4호, 174~179, 2012.
- Passive split and recombination micromixer with convergent-divergent walls, CHEMICAL ENGINEERING JOURNAL, 203, 182~192, 2012.
- 삼각형 내부냉각유로에 설치된 다양한 형태의 리브에 관한 수치해석적 연구, 유체기계저널, 15권 4호, 19~26, 2012.
- 이중분사 막냉각 홀의 측면 분사각 및 홀 사이의 거리가 막냉각 효율에 미치는 영향, 유체기계저널, 15권 4호, 33~41, 2012.
- Optimization of ski jumper's posture considering lift-to-drag ratio and stability, JOURNAL OF BIOMECHANICS, 45권 12호, 2125~2132, 2012.
- Analysis and Optimization of a Vaned Diffuser in a Mixed Flow Pump to Improve Hydrodynamic Performance, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 134권 7호, 071194-1~071104-10, 2012.
- High-efficiency design of a tunnel ventilation jet fan through numerical optimization techniques, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 26권 6호, 1793~1800, 2012.
- 곡관부 열전달 성능 강화를 위한 에어포일형 가이드 베인의 형상 최적설계, 한국전산유체공학회지, 17권 2호, 1~10, 2012.
- Objective function proposed for optimization of convective heat transfer devices, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55권 11-12호, 2792~2799, 2012.
- Influence of magnetic field and thermal radiation by natural convection past vertical cone subjected to variable surface heat flux, APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 33권 5호, 605~620, 2012.
- 기울어진 타원형 딤플이 부착된 냉각 유로에 대한 열전달 성능해석, 한국전산유체공학회지, 17권 1호, 1~7, 2012.
- Optimization of zigzag flow channels of a printed circuit heat exchanger for nuclear power plant application, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 49권 3호, 343~351, 2012.
- PARAMETRIC STUDY AND OPTIMIZATION OF STAGGERED INCLINED IMPINGING JETS ON A CONCAVE SURFACE FOR HEAT TRANSFER AUGMENTATION, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 61권 6호, 442~462, 2012.
- Multi-objective optimization of a rotating cooling channel with staggered pin-fins for heat transfer augmentation, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 68권 7호, 922~938, 2012.
- Performance evaluation of a transonic axial compressor with circumferential casing grooves, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 226권 A2호, 218~230, 2012.
- Analysis of mixing in a curved microchannel with rectangular grooves, CHEMICAL ENGINEERING JOURNAL, 181, 708~716, 2012.
- Vortex micro T-mixer with non-aligned inputs, CHEMICAL ENGINEERING JOURNAL, 181, 846~850, 2012.
- 자동차 냉/난방 성능 향상을 위한 공기조화 덕트의 기류해석, 설비공학 논문집, 24권 1호, 23~28, 2012.
- Optimization of Rotating Cooling Channel with Pin Fins Downstream of Turning Region, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 26권 1호, 85~97, 2012.
- Optimization of a micromixer with staggered herringbone grooves on top and bottom walls, ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 5권 4호, 506~516, 2011.
- Joule heating and viscous dissipation effects on MHD flow past a semi-infinite inclined plate with variable surface temperature, JOURNAL OF ENGINEERING THERMOPHYSICS, 20권 4호, 501~517, 2011.
- 다양한 막냉각 홀 형상에 대한 막냉각 효율의 수치해석, 한국전산유체공학회지, 16권 4호, 92~99, 2011.
- 주거환기용 시로코홴의 내부모터 형상에 따른 공력특성 연구, 한국전산유체공학회지, 16권 4호, 1~6, 2011.
- Axial-Flow Ventilation Fan Design Through Multi-Objective Optimization to Enhance Aerodynamic Performance, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 133권 10호, , 2011.
- 케이싱 그루브가 장착된 천음속 축류압축기의 작동 안정성 향상을 위한 수치최적화, 유체기계저널, 14권 5호, 31~38, 2011.
- 터널 환기용 제트홴의 성능 향상을 위한 수치최적화, 유체기계저널, 14권 5호, 63~68, 2011.
- 대리모델들을 이용한 인쇄형 열교환기의 최적설계, 유체기계저널, 14권 5호, 55~62, 2011.
- 막냉각 홀의 측면 방향 분사각, 확장각 및 주기가 막냉각 효율에 미치는 영향, 대한기계학회논문집 B, 35권 9호, 903~913, 2011.
- 가중평균대리모델을 이용한 환기용 축류송풍기의 고효율 최적설계, 대한기계학회논문집 B, 35권 8호, 763~771, 2011.
- MULTIOBJECTIVE DESIGN OPTIMIZATION OF THE UPPER PLENUM OF A PBMR-TYPE GAS-COOLED NUCLEAR REACTOR, NUCLEAR TECHNOLOGY, 175권 2호, 361~370, 2011.
- Shape Optimization of Inclined Elliptic Dimples in a Cooling Channel, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 25권 3호, 472~476, 2011.
- Enhanced multi-objective optimization of a dimpled channel through evolutionary algorithms and multiple surrogate methods, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 66권 6호, 742~759, 2011.
- 엇갈리게 기울어진 충돌제트들에 의한 오목면 상의 열전달 성능해석, 한국전산유체공학회지, 16권 2호, 11~16, 2011.
- Optimization of an inclined elliptic impinging jet with cross flow for enhancing heat transfer, HEAT AND MASS TRANSFER, 47권 6호, 731~742, 2011.
- Multiobjective Optimization of Circumferential Casing Grooves for a Transonic Axial Compressor, JOURNAL OF PROPULSION AND POWER, 27권 3호, 730~733, 2011.
- Multi-objective optimization of a cooling channel with staggered elliptic dimples, ENERGY, 36, 3419~3428, 2011.
- On the diffusion of a chemically reactive species in a convective flow past a vertical plate, JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS, 52권 1호, 57~66, 2011.
- Optimization of the upper plenum of a PBMR to enhance thermal performance in the reactor core, ANNALS OF NUCLEAR ENERGY, 38권 2-3호, 720~724, 2011.
- 회전하는 냉각유로의 곡관부에 부착된 가이드 베인의 형상 최적설계, 유체기계저널, 14권 1호, 66~76, 2011.
- Surrogate based optimization of a laidback fan-shaped hole for film-cooling, INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 32권 1호, 226~238, 2011.
- Optimization of Vane Diffuser in a Mixed-Flow Pump for High Efficiency Design, INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 4권 1호, 183~189, 2011.
- Thermal transport and performance analysis of pressure- and electroosmotically-driven liquid flow microchannel heat sink with wavy wall, HEAT AND MASS TRANSFER, 47권 1호, 93~105, 2011.
- 신경회로망기법을 사용한 타원형 딤플유로의 냉각성능 최적화, 유체기계저널, 13권 6호, 42~50, 2010.
- Multiobjective Optimization of a Grooved Micro-Channel Heat Sink, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 33권 4호, 767~776, 2010.
- Shape Optimization of a Dimpled Channel to Enhance Heat Transfer Using a Weighted-Average Surrogate Model, HEAT TRANSFER ENGINEERING, 31권 13호, 1114~1124, 2010.
- Numerical Study on Mixing Performance of Straight Groove Micromixers, THE INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 3권 3호, 227~234, 2010.
- 곡관부 하류에 핀휜이 부착된 회전 냉각유로의 최적설계, 유체기계저널, 13권 5호, 43~53, 2010.
- Numerical study of the effect on mixing of the position of fluid stream interfaces in a rectangular microchannel, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 16권 10호, 1757~1763, 2010.
- Performance enhancement of axial fan blade through multi-objective optimization techniques, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 24권 10호, 2059~2066, 2010.
- Optimization and Comparative Study on Oblique- and Rectangular-Fin Microchannel Heat Sinks, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 24, 849~852, 2010.
- 반응면기법을 이용한 PBMR 기체냉각형 고온가스로 상층부의 최적설계, 한국전산유체공학회지, 15권 3호, 16~23, 2010.
- Enhanced multi-objective optimization of a microchannel heat sink through evolutionary algorithm coupled with multiple surrogate models, APPLIED THERMAL ENGINEERING, 30, 1683~1691, 2010.
- Shape optimization of a micromixer with staggered-herringbone grooves patterned on opposite walls, CHEMICAL ENGINEERING JOURNAL, 162권 2호, 730~737, 2010.
- Mixing performance of unbalanced split and recombine micomixers with circular and rhombic sub-channels, CHEMICAL ENGINEERING JOURNAL, 162권 2호, 760~767, 2010.
- 환기용 축류송풍기의 유동해석 및 모터 위치에 따른 성능 특성 연구, 유체기계저널, 13권 4호, 25~30, 2010.
- Multi-objective optimization of a centrifugal compressor impeller through evolutionary algorithms, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 224, 711~721, 2010.
- Shape optimization of a fan-shaped hole to enhance film-cooling effectiveness, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53, 2996~3005, 2010.
- Numerical study on a vertical plate with variable viscosity and thermal conductivity, ARCHIVE OF APPLIED MECHANICS, 80, 711~725, 2010.
- 핀휜이 부착된 회전하는 냉각유로의 최적설계, 대한기계학회논문집 B, 34권 7호, 703~714, 2010.
- Multi-objective Optimization of a Laidback Fan Shaped Film-Cooling Hole Using Evolutionary Algorithm, THE INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 3권 2호, 150~159, 2010.
- Optimum Design of a Channel Roughened by Dimples to Improve Cooling Performance, FRONTIERS OF ENERGY AND POWER ENGINEERING IN CHINA, 4권 2호, 262~268, 2010.
- Free convection of a dusty-gas flow along a semi-infinite vertical cylinder, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 63, 517~532, 2010.
- A novel passive micromixer based on unbalanced splits and collisions of fluid streams, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 20, , 2010.
- 케이싱 그루브가 존재하는 축류압축기의 성능특성 연구, 유체기계저널, 13권 2호, 25~30, 2010.
- 주거환기용 시로코홴의 공력 및 소음 특성 연구, 유체기계저널, 13권 2호, 19~24, 2010.
- Analysis and optimization of a micromixer with a modified Tesla structure, CHEMICAL ENGINEERING JOURNAL, 158, 305~314, 2010.
- Viscous dissipation effects on heat transfer in flow over an inclined plate, JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS, 51, 241~248, 2010.
- 양배수용 사류펌프 내 삼차원 유동에 대한 수치적 연구, 유체기계저널, 13권 1호, 16~22, 2010.
- High-efficiency design of a mixed-flow pump, SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 53, 24~27, 2010.
- Surrogate Modeling for Optimization of a Centrifugal Compressor Impeller, THE INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 3권 1호, 29~38, 2010.
- Optimization of a stepped circular pin-fin array to enhance heat transfer performance, HEAT AND MASS TRANSFER, 46, 63~74, 2009.
- Analysis and optimization of electrokinetic microchannel heat sink, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 52, 5271~5275, 2009.
- A Numerical Study of Mixing in a Microchannel with Circular Mixing Chambers, AICHE JOURNAL, 55, 2217~2225, 2009.
- Effects of mass transfer on free convection flow past a semi-infinite inclined plate with variable surface temperature, JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 82권 5호, 872~881, 2009.
- 핵연료 봉다발내 비틀린 혼합날개의 형상최적설계, 유체기계저널, 12권 4호, 7~13, 2009.
- 홴형상 막냉각홀의 신경회로망 기법을 이용한 최적설계, 유체기계저널, 12권 4호, 44~53, 2009.
- Effects of vent shaft location on the ventilation performance in a subway tunnel, JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 97, 174~179, 2009.
- Evaluation of the mixing performance of three passive micromixers, CHEMICAL ENGINEERING JOURNAL, 150, 492~501, 2009.
- Shape Optimization of Inlet Plenum in a PBMR-Type Gas-Cooled Nuclear Reactor, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 46, 649~652, 2009.
- 자오면 형상을 고려한 원심압축기 임펠러 최적설계, 유체기계저널, 12권 3호, 7~13, 2009.
- 핵연료 봉다발내 Y 혼합날개의 형상최적설계, 한국전산유체공학회지, 14권 2호, 1~9, 2009.
- Thermal Optimization of a Microchannel Heat Sink With Trapezoidal Cross Section, JOURNAL OF ELECTRONIC PACKAGING, 131, 021005-1~021005-6, 2009.
- Numerical solutions for unsteady flow past a semi-infinite inclined plate with temperature oscillations, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 23, 1710~1717, 2009.
- Surrogate Based Optimization Techniques for Aerodynamic Design of Turbomachinery, INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 2권 2호, 179~188, 2009.
- Electroosmotically enhanced microchannel heat sinks, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 23, 814~822, 2009.
- Shape Optimization of 19-Pin Wire-Wrapped Fuel Assembly of LMR Using Multiobjective Evolutionary Algorithm, NUCLEAR SCIENCE AND ENGINEERING, 161권 2호, 245~254, 2009.
- Parametric study on mixing of two fluids in a three-dimensional serpentine microchannel, CHEMICAL ENGINEERING JOURNAL, 146권 3호, 439~448, 2009.
- Optimization of a Cylindrical Film Cooling Hole using Surrogate Modeling, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 55권 4호, 362~380, 2009.
- Application of Surrogate Modeling to Design of A Compressor Blade to Optimize Stacking and Thickness, INTERNATIONAL JOURNAL OF FLUID MACHINERY AND SYSTEMS, 2권 1호, 1~12, 2009.
- 엇갈린 V-형 리브가 부착된 냉각유로에서의 열유동 수치해석, 한국전산유체공학회지, 13권 4호, 107~113, 2008.
- Multi-objective optimization of a dimpled channel for heat transfer augmentation, HEAT AND MASS TRANSFER, 45, 207~217, 2008.
- 신경회로망기법을 사용한 원통형 막냉각 홀의 최적설계, 대한기계학회논문집B, 32권 12호, 954~962, 2008.
- Optimization of a staggered dimpled surface in a cooling channel using Kriging model, INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 47, 1464~1472, 2008.
- Multiobjective optimization of a microchannel heat sink using evolutionary algorithm, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 130, , 2008.
- Effects of wire-spacer shape in LMR on thermal-hydraulic performance, NUCLEAR ENGINEERING AND DESIGN, 238, 2678~2683, 2008.
- Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 22, 1864~1869, 2008.
- Shape optimization of an axial compressor blade by multi-objective genetic algorithm, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 222, 599~611, 2008.
- Multi-Objective Optimization of Cooling Channel Roughened by Dimples, JOURNAL OF FLUID SCIENCE AND TECHNOLOGY, 3권 6호, 754~763, 2008.
- Effects of Inflow Distortion due to Hub-Cap's Shape on the Performance of Axial Flow Fan, JOURNAL OF FLUID SCIENCE AND TECHNOLOGY, 3권 5호, 598~609, 2008.
- Comparative analysis of flow and convective heat transfer between 7-pin and 19-pin wire-wrapped fuel assemblies, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 45권 7호, 653~661, 2008.
- Microchannel heat sink with designed roughness: Analysis and optimization, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 22권 3호, 342~351, 2008.
- The Effects of MHD on Free-Convection Flow Past a Semi-Infinite Isothermal Inclined Plate, JOURNAL OF ENGINEERING PHYSICS AND THERMOPHYSICS, 81권 4호, 724~731, 2008.
- 엇갈린 다이아몬드형 핀휜의 형상에 따른 난류열전달 성능해석, 한국전산유체공학회지, 13권 2호, 20~26, 2008.
- Shape optimization of wire-wrapped fuel assembly using Kriging metamodeling technique, NUCLEAR ENGINEERING AND DESIGN, 238, 1332~1341, 2008.
- Optimization of a microchannel heat sink with temperature dependent fluid properties, APPLIED THERMAL ENGINEERING, 28권 8-9호, 1101~1107, 2008.
- Shape optimization of micro-channel heat sink for micro-electronic cooling, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 31권 2호, 322~330, 2008.
- Multi-objective optimization of an axial compressor blade, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 22, 999~1007, 2008.
- 가중평균대리모델을 사용한 천음속 압축기 블레이드 최적화, 대한기계학회논문집B, 32권 4호, 317~326, 2008.
- 익형의 형상최적화를 통한 고효율 축류송풍기 설계, 유체기계저널, 11권 2호, 46~54, 2008.
- Multiobjective optimization of a wire-wrapped LMR fuel assembly, NUCLEAR TECHNOLOGY, 162권 1호, 45~52, 2008.
- Multi-Objective Shape Optimization of an Axial Fan Blade, INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION, 16권 1호, 1~8, 2008.
- Multiple surrogate modeling for axial compressor blade shape optimization, JOURNAL OF PROPULSION AND POWER, 24권 2호, 302~310, 2008.
- Design optimization of a low-speed fan blade with sweep and lean, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 222권 A1호, 87~92, 2008.
- Evaluation of surrogate models for optimization of herringbone groove micromixer, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 22권 2호, 387~396, 2008.
- 가중평균 대리모델을 사용한 딤플 유로의 최적설계, 유체기계저널, 11권 1호, 52~60, 2008.
- Multiobjective optimization of staggered elliptical pin-fin arrays, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 53권 4호, 418~431, 2008.
- Heat and Mass Transfer Effects on Free Convective Flow Past A Semi- Infinite Vertical Plate, ANNALS OF THE FACULTY OF ENGINEERING HUNEDOARA - JOURNAL OF ENGINEERING, 6권 1호, 201~206, 2008.
- Shape optimization of a micromixer with staggered herringbone groove, CHEMICAL ENGINEERING SCIENCE, 62권 23호, 6687~6695, 2007.
- 고압 이단 링블로워의 삼차원 유동해석 및 성능평가, 한국전산유체공학회지, 12권 4호, 85~91, 2007.
- 발전소용 고압 바이패스 밸브 내부 유동해석, 유체기계저널, 10권 6호, 17~23, 2007.
- Numerical treatment of pebble contact in the flow and heat transfer analysis of a pebble bed reactor core, NUCLEAR ENGINEERING AND DESIGN, 237권 22호, 2183~2196, 2007.
- 크리깅 모델을 이용한 미세유로의 형상최적설계, 대한기계학회논문집B, 31권 9호, 733~740, 2007.
- 핵연료 봉다발내 혼합날개에 의한 난류열전달 해석, 유체기계저널, 10권 4호, 9~14, 2007.
- 신경회로망 기법을 사용한 액체금속원자로 봉다발의 형상최적화, 대한기계학회논문집B, 31권 8호, 663~671, 2007.
- 헤링본 미세혼합기의 크리깅 모델을 사용한 최적형상설계, 대한기계학회논문집B, 31권 8호, 711~717, 2007.
- Surrogate modeling for optimization of dimpled channel to enhance heat transfer performance, JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 21권 3호, 667~671, 2007.
- Application of the radial basis neural network to optimization of a micromixer, CHEMICAL ENGINEERING & TECHNOLOGY, 30권 7호, 962~966, 2007.
- Evaluation of surrogate models in optimization of wire-wrapped fuel assembly, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 44권 6호, 819~822, 2007.
- 축류압축기 블레이드의 표면조도가 성능에 미치는 영향, 유체기계저널, 10권 3호, 9~16, 2007.
- 신경회로망기법을 사용한 엇갈린 딤플 유로의 최적설계, 유체기계저널, 10권 3호, 39~46, 2007.
- Design optimization of internal cooling passage with V-shaped ribs, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 51권 11호, 1103~1118, 2007.
- V-형 리브가 부착된 냉각유로의 형상 최적설계, 유체기계저널, 10권 2호, 7~15, 2007.
- Optimization of Rotor Blade Stacking Line Using Three Different Surrogate Models, 유체기계저널, 10권 2호, 22~31, 2007.
- Applications of numerical optimization techniques to design of axial compressor blades, JOURNAL OF AEROSPACE POWER, 22권 4호, 645~652, 2007.
- Experimental and numerical analyses of train-induced unsteady tunnel flow in subway, TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 22권 2호, 166~172, 2007.
- Numerical study on flow field in inlet plenum of a pebble-bed modular reactor, NUCLEAR ENGINEERING AND DESIGN, 237권 6호, 565~574, 2007.
- 허브 캡 형상에 따른 축류송풍기 성능특성, 유체기계저널, 9권 6호, 9~16, 2006.
- Shape Optiimization of Inclined Ribs as Heat Transfer Augumentation Device, JOURNAL OF THERMAL SCIENCE, 15권 4호, 364~370, 2006.
- Shape optimization of three-dimensional channel roughened by angled ribs with RANS analysis of turbulent heat transfer, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 49, 4013~4022, 2006.
- Flow and convective heat transfer analysis using RANS for a wire-wrapped fuel assembly, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 20, 1514~1524, 2006.
- 제트송풍기 노즐의 형상최적설계, 대한기계학회논문집B, 30권 8호, 715~721, 2006.
- 증기터빈 바이패스밸브 케이지 유동장 해석 관한 연구, 유체기계저널, 9권 4호, 36~42, 2006.
- 난류열전달 증진을 위한 딤플형상의 최적설계, 대한기계학회논문집B, 30권 7호, 700~706, 2006.
- 형상최적화를 통한 축류송풍기의 설계, 대한기계학회논문집B, 30권 7호, 603~611, 2006.
- NASA Rotor 37 익형의 스윕각 최적화, 대한기계학회논문집B, 30권 7호, 622~629, 2006.
- 단단 천음속 축류압축기 동익의 Stacking Line 설계 최적화, 유체기계저널, 9권 3호, 7~13, 2006.
- 스크린도어가 설치된 지하철에서 열차운행에 의한 비정상유동의 실험 및 수치적 해석, 설비공학논문집, 18권 2호, 103~111, 2006.
- Application of numerical optimization technique to design of forward-curved blades centrifugal fan, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 49, 152~158, 2006.
- Shape Optimization of A Dimpled Channel to Enhance Turbulent Heat Transfer, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, Vol. 48, No. 9, 901~915, 2005.
- Optimization of a Stator Blade Using Response Surface Method in a Single-Stage Transonic Axial Compressor, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol. 219, No. 8, 595~603, 2005.
- Optimization of Blade Sweep in a Transonic Axial Compressor Rotor, JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, Vol. 48, No. 4, 793~801, 2005.
- 단단 천음속 축류압축기의 정익형상 최적설계, 대한기계학회논문집B, 29권 5호, 625~632, 2005.
- 유량에 따른 축류홴의 익단누설와류 및 후류 특성, 대한기계학회논문집B, 29권 3호, 322~329, 2005.
- Numerical Optimization for The Design of A Spacer Grid with Mixing Vanes in A Pressurized Water Reactor Fuel Assembly, NUCLEAR TECHNOLOGY, Vol. 149, No. 1, 62~70, 2005.
- 반응면기법을 이용한 침전조의 형상최적설계, 유체기계저널, 7권 6호, 55~61, 2004.
- 설계유량을 변수로 한 원심다익송풍기의 최적설계, 대한기계학회논문집B, 28권 11호, 1332~1339, 2004.
- Design optimization of rib-roughened channel to enhance turbulent heat transfer, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 47, No. 23, 5159~5168, 2004.
- Shape Optimization of Forward-Curved Blades Centrifugal Fan with Navier- Stokes Analysis, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 126, No. 5, 735~742, 2004.
- 경사진 사각리브가 부착된 열전달면의 수치최적화기법을 이용한 형상설계, 대한기계학회논문집B, 28권 9호, 1051~1057, 2004.
- 핵연료 집합체 혼합날개형상의 수치최적설계, 대한기계학회논문집B, 28권 8호, 929~936, 2004.
- 반응면 기법을 이용한 경사진 리브가 부착된 삼차원 열전달유로의 최적설계, 대한기계학회논문집B, 28권 7호, 879~886, 2004.
- 원심다익송풍기의 고효율설계를 위한 수치최적설계, 유체기계저널, 7권 3호, 32~38, 2004.
- Shape Optimization of A Mixing Vane in Subchannel of Nuclear Reactor, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, Vol. 41, No. 5, 641~644, 2004.
- 축류 홴의 익단누설와류 및 후류에서 유량에 따른 속도변동의 주파수 특성, 대한기계학회논문집B, 28권 2호, 181~188, 2004.
- 축류홴 익단누설와류의 수치적 해석, 유체기계저널, 7권 1호, 36~44, 2004.
- Three-Dimensional Flow Analysis and Improvement of Slip Factor Model for Forward-Curved Blades Centrifugal Fan, KSME INTERNATIONAL JOURNAL, Vol.18, No. 2, 309~319, 2004.
- 5공 피토관 및 회전 열선 유속계에 의한 축류팬 내부 유동장 계측 및 평가, 대한기계학회논문집B, 27권 12호, 1750~1757, 2003.
- 배관구조에 따른 속도분포 변형과 선회가 오리피스 유량계의 압력차에 미치는 영향에 대한 수치적 연구, 대한기계학회논문집B, 27권, 10호, 1450~1456, 2003.
- 삼차원 Navier-Stokes해석과 반응면기법을 이용한 원심다익송풍기의 최적설계, 대한기계학회논문집B, 27권, 10호, 1457~1463, 2003.
- Three-Dimensional Analysis of Turbulent Heat Transfer and Flow through Mixing Vane in A Subchannel of Nuclear Reactor, JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, Vol.40, No.10, 719~724, 2003.
- 난류열전달 향상을 위한 엇갈린 리브가 부착된 열전달면의 형상최적설계, 대한기계학회논문집B, 27권, 9호, 1351~1359, 2003.
- 고효율 침전조 설계를 위한 실험 및 수치해석, 유체기계저널, 6권, 2호, 54~61, 2003.
- Calculations of Three-Dimensional Viscous Flow in A Multi-Blade Centrifugal Fan by Modeling Blade Forces, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.217, No.3, 287~297, 2003.
- Aerodynamic Design Optimization of A Compressor Rotor with Navier-Stokes Analysis, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.217, No.2, 179~184, 2003.
- 관류 익형송풍기의 유동해석에 대한 난류모델 및 수치도식의 영향에 관한 연구, 유체기계저널, 6권, 1호, 23~29, 2003.
- 원자로 부수로내 혼합날개을 지나는 삼차원 열유동 해석, 대한기계학회논문집B, 27권, 3호, 311~318, 2003.
- 원심압축기의 유동해석을 위한 준삼차원 해석기법, 유체기계저널, 6권1호, 30~36, 2003.
- 반응면 기법을 이용한 천음속 축류압축기의 삼차원 형상 최적설계, 대한기계학회논문집B, 27권 2호, 155~162, 2003.
- Analysis of Impinging and Countercurrent Stagnating Flows by Reynolds Stress Model, JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 124, No. 3, 706~718, 2002.
- Shape optimization of rib-roughened surface to enhance turbulent heat transfer, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 45, No. 13, 2719~2727, 2002.
- 저레이놀즈수 레이놀즈응력모델을 이용한 난류선회류의 유동해석, 한국전산유체공학회지, 6권, 4호, 35~42, 2001.
- 천음속 압축기 동익을 지나는 삼차원유동의 수치해석, 대한기계학회논문집B, 25권 10호, 1384~1391, 2001.
- Mean Streamline Performance Analysis of Mixed-Flow Fan Impellers Covering the Low Flowrate Characteristics, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.215, A4, 513~518, 2001.
- 천음속 유동장에 대한 난류모델들의 성능평가, 한국항공우주학회지, 29권 5호, 33~39, 2001.
- Assessment of Reynolds Stress Turbulence Closures in The Calculation of Transonic Separated Flow, KSME INTERNATIONAL JOURNAL, Vol.15, No.7, 889~894, 2001.
- Conceptual Design Optimization of Mixed-Flow Pump Impellers Using the Mean Streamline Analysis, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, Vol.215, 133~138, 2001.
- 축류송풍기의 저소음 설계에서 수치최적화기법들의 평가, 대한기계학회논문집B, 24권 10호, 1335~1342, 2000.
- 단단 축류압축기 유동해석에 대한 k-w난류모델의 응용, 국내공인학술지(이전), 3권 3호, 7~11, 2000.
- Design Optimization of Axial Flow Compressor Blades with Three-Dimensional Navier-Stokes Solver, KSME INTERNATIONAL JOURNAL, Vol. 14, No. 9, 1005~1012, 2000.
- 다익송풍기 내부 3차원 정상유동의 수치해석, 국내공인학술지(이전), 3권 1호, 19~27, 2000.
- 레이놀즈응력모델을 이용한 난류의 고분자물질 첨가 저항감소현상에 대한 수치해석, 대한기계학회논문집B, 24권 1호, 1~8, 2000.
- 원관내 난류의 저항감소현상에 대한 수치해석, 국내공인학술지(이전), 11권, 6호, 733~739, 1999.
- 송풍기와 덕트시스템, 대학논문, , 1~20, 1999.
- 송풍기에너지 절약, 대학논문, , 102~123, 1999.
- 다단축류압축기내의 천음속 점성유동에 대한 삼차원 수치해석, 국내공인학술지(이전), 26권, 8호, 40~49, 1998.
- 지하철 환기시스템의 최적화에 관한 연구, 국내공인학술지(이전), 10권 5호, 630~639, 1998.
- Numerical Optimization for Design of An Automotive Cooling Fan, 국제수준학술지(이전), 106권 6호, 1485~1489, 1998.
- Prediction of Turbulent Heat Transfer in Swirling Flow Downstream of An Abrupt Pipe Expansion, KSME INTERNATIONAL JOURNAL, Vol. 11, No. 5, 565~573, 1997.
- 전산유체역학적 송풍기 설계기법, 대학논문, , , 1997.
- 축류송풍기의 삼차원유동장해석, 국내공인학술지(이전), 21권, 4호, 541~550, 1997.
- Universal Characteristics of Drag Reducing Polyisobutylene in Kerosene, JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY, Vol. A34, No. 4, 705~711, 1997.
- 원관내 급확대부 하류의 강선회난류에 관한 수치해석, 국내공인학술지(이전), 9권, 1호, 23~32, 1997.
- 자동차 냉각팬 최적설계기법, 대학논문, , 53~74, 1996.
- 확대관내의 난류선회류에 대한 수치해석, 대학논문, 24-1집, 29~40, 1996.
- 송풍기 설계를 위한 수치최적설계의 응용, 국내공인학술지(이전), 7권, 4호, 566~576, 1995.
- 후향계단을 지나는 박리류에 대한 레이놀즈응력모델의 성능평가, 국내공인학술지(이전), 19권, 11호, 3014~3021, 1995.
- 원관내 난류선회류의 수치해석, 국내공인학술지(이전), 7권, 3호, 396~405, 1995.
- 축류송풍기 설계를 위한 유동해석 코드의 개발, 대학논문, 23-1집, 53~64, 1995.
- Prediction of Turbulent Heat Transfer Downstream of an Abrupt Pipe Expansion, KSME INTERNATIONAL JOURNAL, Vol.8, No.3, 248~254, 1994.
- Reply by Authors to G. C. Cheng, AIAA JOURNAL, Vol.29, No.6, 1025, 1991.
- Reply by Authors to F. B. Gessner and M. A. Leschziner, AIAA JOURNAL, Vol.27, No.9, 1306, 1989.

주요학술저서

- Encyclopedia of Aerospace Engineering, John Wiley & Sons Ltd, 2010.
- 공조편람, 설비공학회, 2001.

특허

- 사인파형 맥동유동을 이용한 축소-확대형 미세 혼합기 및 이를 이용한 유체 혼합 방법(convergent-divergent micromixer using sinusoidal pulsatile flow and mixing method of fluid using the same), 2016.
- 원반형의 혼합부와 교차되는 혼합채널을 가진 미세혼합기(MICROMIXER WITH CIRCULAR CHAMBERS AND CROSSING CONSTRICTION CHANNELS), 2014.
- 냉각장치 내부냉각유로의 내면에 부착되는 핀-휜의 새로운 형상 구조(The novel shape of pin-fin attached to inner surface of colling passage on the inside cooling apparatus), 2014.
- 인쇄기판형 열교환기(Printed Circuit Heat Exchanger), 2014.
- 일부 측면이 비대칭인 냉각유로용 리브, 이를 구비한 냉각장치 및 가스터빈 블레이드(Asymmetric rib for cooling passage, Gas turbine blade and cooling apparatus having the same), 2014.
- 비정렬된 주입구를 이용한 와류 미세혼합기(Vortex micro T-mixer with non-aligned inputs), 2013.
- 수동형 미세 혼합기(Passive Micromixer), 2013.
- 일부 측면이 비대칭인 냉각유로용 리브,이를 구비한 냉각장치 및 가스터빈 블래이드, 2013.
- 인쇄기판형 열교환기, 2013.
- 냉각장치 내부냉각유로의 내면에 부착되는 핀-휜의 새로운형상구조, 2013.
- 원반형의 혼합부와 교차되는 혼합채널을 가진 미세혼합기, 2012.
- 축류압축기의 케이싱 그루브 최적설계방법(Optimization design method for casing grooves of an axial compressor), 2012.
- 비정렬된 주입구를 이용한 와류 미세혼합기, 2012.
- 수동형 미세 혼합기, 2011.
- 가스터빈 블레이드의 냉각을 위한 막냉각 홀의 형상 구조, 2011.
- 수동형 미세혼합기 (Passive micromixer), 2010.
- 축류압축기의 케이싱 그루브 최적설계방법 및 최적설계된 케이싱 그루브, 2010.
- 수동형 미세혼합기, 2008.
- 액체금속로 연료봉다발 내 와이어 스페이서의 설계 방법 및그에 의해 제조된 와이어 스페이서 (Method for Designing Wire-Spacer in Fuel Assembly, 2008.
- 핵연료 집합체용 지지격자의 혼합날개 제조방법 및 혼합날개(FLOW MIXING VANE MANUFACTURING METHOD AND FLOW MIXINGVANE STRUCTURE , 2007.
- 미세유로 열흡수 장치 설계 방법 및 그에 의해 제조된 미세유로, 2007.
- 액체금속로 연료봉다발 내 와이어 스페이서의 설계 방법 및 그에 의해 제조된 와이어 스페이서, 2007.
- 원심다익송풍기의 요소검출 방법 및 그 방법에 의해 제조되는 원심다익송풍기, 2004.
- 핵연료 집합체용 지지격자의 혼합날개 제조방법 및 혼합날개, 2004.
- 원자로 부수로의 냉각제 혼합을 위한 비틀림 혼합날개를 갖는 지지격자체, 2002.
- 저소음팬 설계방법에 의한 축류팬 날개, 2002.
- 축류팬의 블래이드 설계방법 및 그에 의해 제조된 블래이드, 2002.
- 선박용 축류팬, 2000.